1
You Are Cute Rubber Base — a transparent, versatile base coat. Slight shrinkage may occur during wear due to the elastic properties of the base. On damaged or very thin nails, a feeling of warmth or slight burning may occur (these sensations are usually absent on healthy nails). Suitable as a base for any coatings, as well as for extensions on gel tips. For polymerization of the base it is recommended to use a lamp with a power of 36–48 W, and it should be original.
Advantages:
- medium consistency, self-leveling;
- TPO FREE;
- convenient brush of ideal shape;
- acidity 3–4 pH;
- easy removal both by filing and with liquid;
- ensures wear without lifting for 3–4 weeks;
- hypoallergenic and has a neutral odor.
Specifications
| Color | transparent |
| Volume | 5 ml |
| Consistency | medium |
| Acidity (pH) | 3–4 |
| Manufacturer | You Are Cute |
Application method:
- Remove the coating.
- Do not file the nail shape or leave a length of 2 mm to be removed after leveling.
- Using a 220-grit file or a 100-grit buffer, lightly file without strong pressure, lifting the scales of the nail plate.
- Perform a manicure.
- If using removers, wash hands with soap after the procedure.
- Degrease the nail plate using Nail Prep. Perform two passes using 4 wipes (1 wipe per 5 fingers). First pass — wipe the nail surface. Second — using an orange stick with a wipe, carefully treat the cuticle area and sidewalls.
- Use primer if desired, but if the base for the substrate has sufficient acidity, it is not required.
- Apply the Rubber Base layer with a flat gel brush using rubbing motions. Cover all nail sidewalls and cure in a lamp for 60 seconds.
- Remove the sticky layer.
- Perform leveling. Cure in the lamp for 90 seconds.
- File the shape after leveling to form the correct thickness at the free edge.
- If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. This prevents lifting. If the material is hard and the nail is very soft, the nail itself may detach from the material at the free edge.
- After filing, remove the sticky layer and apply a thin layer of gel polish or camouflage base.
- Apply top coat. Cure for 120 seconds. Do not wipe after curing to maintain shine.
How to use a promotional code
