Laminating composition Rarity Step 2 Lami Hold sachet 2 ml

The fixing agent Rarity Step 2 Lami Hold ensures stabilization of the new hair shape obtained during the first stage of the procedure. The product is used for eyelash lamination and eyebrow lamination. The formula is designed to provide effectiveness while ensuring safety during the procedure.

Main features:

• Gentle, effective cysteamine-based formula – free from thioglycolate.
• No glue required – hairs are held in place by Lami Powder.
• For eyelashes and eyebrows – universal use.
• Elastic, glossy effect – without over-drying.
• 2 ml sachet – up to 8 procedures.
• Single-use packaging – hygiene and freshness.
• Product complies with EU standards.

Specifications

Eyelash lamination:

1. Clean eyelashes and the eye area. Use a gentle cleansing shampoo, such as Chrissanthie.
2. Select a suitable silicone rod. For the straightening stage, Blossom Apple, Ultra Slim, or Jade Bear shapes are best.
3. Prepare Lami Melt with Lami Powder: mix Lami Melt with approximately 1/5 part Lami Powder in a silicone palette. Note: the amount of powder may vary depending on the client’s lashes. However, do not add too much.
4. Apply the mixture to the lashes: cover lashes with a thin layer of Lami Melt with Lami Powder, distributing evenly along the full length and carefully pressing lashes onto the rod. Exposure time: thin lashes: 6–8 minutes, normal lashes: 8–10 minutes, thick, stubborn lashes: 10–12 minutes.
5. Remove the product dry. Use a dry stick or applicator.
6. Replace the rod with a shaping one. Use shapes such as Aqua Fins, Rose Glam, or Emerald Frogs.
7. Apply Lami Hold (Step 2) with Lami Powder: cover lashes with a thin layer, ensuring perfect placement on the rod. Exposure time: 6–10 minutes (about 2 minutes less than Lami Melt).
8. Remove the product and rinse lashes. First dry, then wipe with a damp applicator.
9. (Optional) Perform tinting: dye + 3% oxidant depending on the desired effect.
10. Apply Lami Hydro Care (Step 3–4): leave for a few minutes, then gently remove excess product.
11. (Optional) Finish styling with Volume serum.

Eyebrow lamination:

1. Clean the skin and eyebrow hairs. Use a special brow cleanser, such as Chrissanthie shampoo.
2. Apply Lami Melt (Step 1) with Lami Powder: evenly apply a thin layer to dry, clean hairs, shaping them as desired. Exposure time: thin, delicate brows: 4–6 minutes, normal brows: 6–8 minutes, thick, coarse brows: 8–10 minutes.
3. Remove the product dry. Then wipe brows with a cotton swab moistened with water.
4. Apply Lami Hold (Step 2): cover brows with a thin layer, fixing their shape. Exposure time: 5–7 minutes (max 8 minutes).
5. Remove the product and clean the skin. First dry, then with a damp applicator.
6. (Optional) Perform tinting.
7. Apply Lami Hydro Care (Step 3–4): leave for a few minutes to moisturize and restore hairs, then remove excess product.
8. (Optional) Style brows using a finishing product. For a “wow” effect, use Rarity Brow Balm. For hydration, use ThickFix serum.